picprojects.net Forum

picprojects.net Forum
It is currently Sun Sep 23, 2018 5:51 pm

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Parallel port voltage
PostPosted: Tue Jan 28, 2014 2:01 pm 

Joined: Tue Jan 28, 2014 1:36 pm
Posts: 1
Hi all, I'm new in this forum. I'm from italy and I want to begin to programming pic (maybe 18f14k50).
I read the picprog lvisp guide and before buying the components, I checked the parallel port voltage, without anything, only two wire from pin 5 and pin 25, then with picpgm I test the hardware MCLR. I thought that it should be 5v, but I found 3.34v.
Is it possible? Is something goes wrong?
I apologize for my English.

 Post subject: Re: Parallel port voltage
PostPosted: Sat Feb 01, 2014 7:00 pm 

Joined: Fri Oct 28, 2011 5:18 pm
Posts: 225

if you have built PICPgm LVISP (Low-Voltgage, In-System Programmer), you need external 5V power supply for powering the 7405 inverter. Have you measured the voltage between pin 7 and 14 of the 7405? Here you should have 5V.


Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group